Custom firmwareFraming and composition

More aspect ratios

Adds five aspect ratios: 7:6, 5:4, 4:3, 16:9 and full-width 65:24.

After flashing, switch it on on the Features page of GRLife Pro in the camera.

Illustration of the camera’s aspect ratio menu: 3:2 and 1:1 stay, 7:6, 5:4, 4:3, 16:9 and 65:24 are added, 65:24 selected in yellow
Aspect ratio · camera menu illustration

What it does

  • Adds 7:6, 5:4 and 4:3 (cropping the sides only)
  • Adds 16:9 and full-width 65:24 (cropping top and bottom only)
  • A mask outside the frame in live view (half-transparent with a white edge for 16:9, 5:4, 7:6 and 65:24), with a live preview when you pick a ratio in ADJ

How to use it in the camera

  1. Switch it on on the Features page of GRLife Pro.
  2. Pick the ratio in Image Capture Settings under MENU, or switch it in ADJ.
  3. In live view, 16:9, 5:4, 7:6 and 65:24 show a half-transparent mask with a white edge outside the frame, 4:3 a black one.

Requirements and limits

  • One switch turns on all five ratios; the stock 3:2 and 1:1 stay. If the camera is on a new ratio when you switch it off, it goes back to 3:2.
  • Before flashing back to the stock firmware, set the aspect ratio back to 3:2 or 1:1; any USER mode saved with a new ratio must also be changed back and saved again.

Testing status

Verified on a camera; still keep the stock firmware so you can flash back.

FAQ

Are photos in the new ratios cropped?

Yes. 7:6, 5:4 and 4:3 crop the sides only; 16:9 and 65:24 crop the top and bottom only.

Can I turn on just one or two of the ratios?

One switch turns on all five ratios; the stock 3:2 and 1:1 stay.

After flashing back to the stock firmware, the camera freezes when I turn to a USER mode. What should I do?

That USER mode still holds a new aspect ratio: power on, turn to that mode, set the ratio back to 3:2 or 1:1, then save it again.

Custom firmware, test version · The result is unofficial firmware and flashing carries risk; back up first and keep the official firmware.

Other features