Custom firmwareControls

Snap distance in feet

The snap focus distance reads in feet: in the menus, on the shooting screen and in ADJ, 2.5m shows as 8ft.

After flashing, switch it on on the Features page of GRLife Pro in the camera.

What it does

  • The snap focus distance in the menus, on the shooting screen and in ADJ reads in whole feet (1m = 3.28ft)
  • 0.3m → 1ft, 0.4m → 1ft, 1m → 3ft, 1.5m → 5ft, 2m → 7ft, 2.5m → 8ft, 3.5m → 11ft, 5m → 16ft; ∞ stays ∞
  • Feet in every display language of the camera

How to use it in the camera

  1. Switch it on on the Features page of GRLife Pro.
  2. Once it is on, the snap focus distance reads in feet in the menus, on the shooting screen and in ADJ.

Requirements and limits

  • Only the shown text changes; the focus distance and the way snap focus works stay as stock.
  • Nothing is written to the settings; switching it off or flashing back to the official firmware brings back metres.

Testing status

The GRLife Pro 2.x switch is tested on a GR IIIx 1.70 and a GR IV; the build you tick on its own runs the same code and is verified offline. Keep the stock firmware to flash back.

FAQ

Does the focus distance change?

No. Only the shown text changes: 2.5m is still 2.5m, it just reads 8ft.

Can I turn it off in the camera?

Yes. Switch off “Snap distance in feet” on the Features page of GRLife Pro (it is off by default).

What happens after flashing back to the stock firmware?

Nothing is written to the settings; after flashing back to the official firmware it reads in metres again.

Custom firmware, test version · The result is unofficial firmware and flashing carries risk; back up first and keep the official firmware.

Other features